A flexible solution for cattle houses with slatted floors
The MULLERUP rope drive system T70 is used for removal of manure containing small quantities of precision-chopped straw in cattle houses.  The T70 system is a simple, but very robust and strong manure removal system with very low maintenance costs. T70 is particularly suitable as a slat scraper, but the many built-in functions enable easy customizing to different manure removal needs. 

Easy installation in new and existing cattle houses
The system does not require much room and the power units are delivered as a tower. A T70 system consists of 2 winches fitted on a their own tower in both ends of one or two channels. The two winches work alternately; one power unit coils up the rope while the other power unit is free-wheeling and uncoiling the rope. Maximum stroke length is 70 m. 

Rope monitoring
The design of T70 makes the rope self-tightening. In case of rope breakage an alarm is activated and the system stopped. Between two scrapers a nylon wire with a steel core is fitted to ensure that the scrapers work with a constant distance between them. 

Animal-friendly and very safe operation
The scrapers move very slowly and they reverse direction in case of overload or when meeting an obstacle, thus increasing the animals' safety. In case of overload or an obstacle the scrapers reverse direction and move to the channel end and then reverse again and move forward. This allow the animals sufficient time to move out of the way. If necessary, the T70 will perform the reversing-sequence three times before activating an alarm and stopping the system. An alarm is also activated if there is too much manure on the slats in the reversing position. The T70 system may be fitted with a telephone dial-up alarm. 

A flexible solution
T70 allows manual or automatic operation. It is possible to set up to 16 start-up schedules per day. The scrapers can be parked in both ends of the cattle house.